New G36C Animations (On hold)
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
New G36C Animations (On hold)
Because we have been due for a proper reload for awhile now.
2 versions will be released.
One that will be in OC (Don't know which version)
And one that will be a personal release.
The difference between the two will be animations and hand rigs (the OC version will use OC hands while my personal one's will use MW2 Ranger hands.)
Here is my personal one rigged up.
http://img64.imageshack.us/img64/3223/g36cb.jpg
For those who have a sharp eye, you will notice that the MW2 Ranger hands now have slightly different textures than the ones that were on my Uzis, trust me these look cooler in-game.
I will post the animations here when I stop being lazy.
2 versions will be released.
One that will be in OC (Don't know which version)
And one that will be a personal release.
The difference between the two will be animations and hand rigs (the OC version will use OC hands while my personal one's will use MW2 Ranger hands.)
Here is my personal one rigged up.
http://img64.imageshack.us/img64/3223/g36cb.jpg
For those who have a sharp eye, you will notice that the MW2 Ranger hands now have slightly different textures than the ones that were on my Uzis, trust me these look cooler in-game.
I will post the animations here when I stop being lazy.
Last edited by Linkmister on Tue Jun 08, 2010 4:34 am, edited 1 time in total.
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
- Datastream
- Donator
- Posts: 870
- Joined: Thu Dec 24, 2009 1:24 pm
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
Could this match with this?
http://www.obsidianconflict.net/forums/ ... php?t=3539
http://www.obsidianconflict.net/forums/ ... php?t=3539
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
- Datastream
- Donator
- Posts: 870
- Joined: Thu Dec 24, 2009 1:24 pm
-
- npc_helicopter
- Posts: 932
- Joined: Mon Mar 15, 2010 2:21 pm
- Location: Peruibe , SP , Brazil
- Contact:
-
- Pixel
- Posts: 3
- Joined: Wed May 12, 2010 9:07 am
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
- Linkmister
- Former Developer
- Posts: 192
- Joined: Mon Mar 15, 2010 1:59 am
- Location: California, United States
- Contact:
Okay what should have taken me 20 minutes lasted over an hour! Why? 3ds Max locked up my computer a total of 3 times so I had to restart the bolt-pull each time >.<
So here is the reload as it stands now.
Just have to fix up the ending some and fix the clipping. But that will be tomorrow's job, I am pissed off enough as it is.
So here is the reload as it stands now.
Just have to fix up the ending some and fix the clipping. But that will be tomorrow's job, I am pissed off enough as it is.
I'm not so sure about the new one, I liked the one that was discussed in the FP thread (where the gun is rotated and lifted upwards:
Also here a nice example of how to get to the bolt on the right/other side:
Where is the bolt on a g36c?
lefthandside or right? the shell eject is on the right from what I can see, so the bolt would probably be there too???
Idk what I'm talking about, but the new one I think the gun is too static, the hands are very animated but the gun isn't as much as in previous.
Here's what I wrote in the facepunch thread: I've never held a G36c or w/e it is. But I've held rifles and they ain't light. Anyhow my point is I wouldn't be cocking with one hand whilst holding the rifle outstretched with the other. I'd be resting the butt of the gun just below my right hip at the top of my right thigh
What I'm trying to say is to pull a bolt on any gun you need to either lower the weapon to pull the bolt upwards, or rotate and rest the weapon on thigh, hip or middrift raise the weapon and then pull the bolt downwards. Or rotate weapon with arm so your right arm can with stand holding while you pull the bolt with the left back towards your self.
I'm just one opinion, so you should listen to others aswell, they might like it.
Also here a nice example of how to get to the bolt on the right/other side:
Where is the bolt on a g36c?
lefthandside or right? the shell eject is on the right from what I can see, so the bolt would probably be there too???
Idk what I'm talking about, but the new one I think the gun is too static, the hands are very animated but the gun isn't as much as in previous.
Here's what I wrote in the facepunch thread: I've never held a G36c or w/e it is. But I've held rifles and they ain't light. Anyhow my point is I wouldn't be cocking with one hand whilst holding the rifle outstretched with the other. I'd be resting the butt of the gun just below my right hip at the top of my right thigh
What I'm trying to say is to pull a bolt on any gun you need to either lower the weapon to pull the bolt upwards, or rotate and rest the weapon on thigh, hip or middrift raise the weapon and then pull the bolt downwards. Or rotate weapon with arm so your right arm can with stand holding while you pull the bolt with the left back towards your self.
I'm just one opinion, so you should listen to others aswell, they might like it.
'I would probably smarten up before you meet Violet'.
'She has zero tolerance for idiots'.
fug's Obsidian files
fug's Obsidian clips
Obsidian wiki
Obsidian Map Database
'She has zero tolerance for idiots'.
fug's Obsidian files
fug's Obsidian clips
Obsidian wiki
Obsidian Map Database